- see if camera attached to raspberry pi yo will see something like bcm2835-v4l2: V4L2 device registered as video0 – stills mode > 1280×720
root@lp-arm-4:~# dmesg | grep -i vid
--More--
[ 13.071843] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 13.615235] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 13.615709] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 13.616053] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 13.626826] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 13.631504] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 13.667772] : bcm2835_codec_get_supported_fmts: port has more encoding than we provided space for. Some are dropped.
[ 13.702795] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720
[ 13.708226] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[ 13.744213] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
--More--
- install raspistill binary
apt install libraspberrypi-bin
vcgencmd get_camera
- Removing and adding back sunny connector(the yellow thingy below the camera in the board) worked. (very strange)
https://stackoverflow.com/questions/31354280/raspberry-camera-error-mmal-no-data-received-from-sensor